Light Poles

Octagonal- 3 Meters

  • Type: octagonal

  • Thickness: 3mm

  • Pole shaft & base plate is made of grade S235JR conforming to en 10210-1

  • Pole designed according to bs EN 40

  • Anchor bolt of grade 8.8 (HDG)

  • Pole & bracket are hot dip galvanized (average 100 micron) to BS EN 1461

  • Designed to with stand wind speed of 160km/hr

Octagonal- 4 Meters

  • Type: octagonal

  • Thickness: 3mm

  • Pole shaft & base plate is made of grade S235JR conforming to en 10210-1

  • Pole designed according to bs EN 40

  • Anchor bolt of grade 8.8 (HDG)

  • Pole & bracket are hot dip galvanized (average 100 micron) to BS EN 1461

  • Designed to with stand wind speed of 160km/hr

Octagonal- 5 Meters

  • Type: octagonal

  • Thickness: 3mm

  • Pole shaft & base plate is made of grade S235JR conforming to en 10210-1

  • Pole designed according to bs EN 40

  • Anchor bolt of grade 8.8 (HDG)

  • Pole & bracket are hot dip galvanized (average 100 micron) to BS EN 1461

  • Designed to with stand wind speed of 160km/hr

Octagonal- 6 Meters

  • Type: octagonal

  • Thickness: 3mm

  • Pole shaft & base plate is made of grade S235JR conforming to en 10210-1

  • Pole designed according to bs EN 40

  • Anchor bolt of grade 8.8 (HDG)

  • Pole & bracket are hot dip galvanized (average 100 micron) to BS EN 1461

  • Designed to with stand wind speed of 160km/hr

Octagonal- 8 Meters

  • Type: octagonal

  • Thickness: 3mm

  • Pole shaft & base plate is made of grade S235JR conforming to en 10210-1

  • Pole designed according to bs EN 40

  • Anchor bolt of grade 8.8 (HDG)

  • Pole & bracket are hot dip galvanized (average 100 micron) to BS EN 1461

  • Designed to with stand wind speed of 160km/hr

Octagonal- 10 Meters

  • Type: octagonal

  • Thickness: 3.5 mm

  • Pole shaft & base plate is made of grade S235JR conforming to en 10210-1

  • Pole designed according to bs EN 40

  • Anchor bolt of grade 8.8 (HDG)

  • Pole & bracket are hot dip galvanized (average 100 micron) to BS EN 1461

  • Designed to with stand wind speed of 160km/hr

Conical- 3 Meters

  • Type:  Conical

  • Thickness: 3 mm

  • Pole shaft & base plate is made of grade S235JR conforming to en 10210-1

  • Pole designed according to bs EN 40

  • Anchor bolt of grade 8.8 (HDG)

  • Pole & bracket are hot dip galvanized (average 100 micron) to BS EN 1461

  • Designed to with stand wind speed of 160km/hr

Conical- 4 Meters

  • Type:  Conical

  • Thickness: 3 mm

  • Pole shaft & base plate is made of grade S235JR conforming to en 10210-1

  • Pole designed according to bs EN 40

  • Anchor bolt of grade 8.8 (HDG)

  • Pole & bracket are hot dip galvanized (average 100 micron) to BS EN 1461

  • Designed to with stand wind speed of 160km/hr

Conical- 5 Meters

  • Type:  Conical

  • Thickness: 3 mm

  • Pole shaft & base plate is made of grade S235JR conforming to en 10210-1

  • Pole designed according to bs EN 40

  • Anchor bolt of grade 8.8 (HDG)

  • Pole & bracket are hot dip galvanized (average 100 micron) to BS EN 1461

  • Designed to with stand wind speed of 160km/hr

Conical- 6 Meters

  • Type:  Conical

  • Thickness: 3 mm

  • Pole shaft & base plate is made of grade S235JR conforming to en 10210-1

  • Pole designed according to bs EN 40

  • Anchor bolt of grade 8.8 (HDG)

  • Pole & bracket are hot dip galvanized (average 100 micron) to BS EN 1461

  • Designed to with stand wind speed of 160km/hr

Conical- 8 Meters

  • Type:  Conical

  • Thickness: 3 mm

  • Pole shaft & base plate is made of grade S235JR conforming to en 10210-1

  • Pole designed according to bs EN 40

  • Anchor bolt of grade 8.8 (HDG)

  • Pole & bracket are hot dip galvanized (average 100 micron) to BS EN 1461

  • Designed to with stand wind speed of 160km/hr

Conical- 10 Meters

  • Type:  Conical

  • Thickness: 3.5 mm

  • Pole shaft & base plate is made of grade S235JR conforming to en 10210-1

  • Pole designed according to bs EN 40

  • Anchor bolt of grade 8.8 (HDG)

  • Pole & bracket are hot dip galvanized (average 100 micron) to BS EN 1461

  • Designed to with stand wind speed of 160km/hr

Conical- 12 Meters

  • Type:  Conical

  • Thickness: 4 mm

  • Pole shaft & base plate is made of grade S235JR conforming to en 10210-1

  • Pole designed according to bs EN 40

  • Anchor bolt of grade 8.8 (HDG)

  • Pole & bracket are hot dip galvanized (average 100 micron) to BS EN 1461

  • Designed to with stand wind speed of 160km/hr

Please reload

 
 
 
 
 
 
 
 
 
 
 
 

 

ABOUT   PRODUCT     SOLAR   PROJECT   CONTACT

 

Truelite America

USA - Head Office
Truelite America LLC.
10275, La Cienega St
Las Vegas, NV 89183,USA

‎+1 (702) 988-6438
Email: info@truelite.us

 

 

Truelite Energy Innovations
Asayel Road, Al Quoz 4
P.O. Box: 118023,Dubai,
United Arab Emirates 
T: + 971 4 3883377 
F: +971 4 3883758 
Email: info@truelite.us

 

 

©2020 Truelite America LLC. All rights reserved.